Midland CT410 Guía para resolver problemas descargar pdf (Pagina 18)

ENGLISH

Self-Programming mode

To enter in Self-Programming mode, follow these steps:

1. while turning on the unit, hold down ‘MONI’ and

until ‘SELF’ is displayed;

2. press

;

3. turn the Encoder knob and select the memory number to program;

4. push

again;

5. digit the desired rx frequency;

6. press

;

7. press

and with the Encoder knob select the desired CTCSS in RX (if you

press it again, you can select a DCS code);

8. press

;

9. digit the desired tx frequency;

10. push

;

11. press

and with the Encoder knob select the desired CTCSS in TX (if you

press it again, you can select a DCS code);

12. press

;

13. with the Encoder knob, enable/disable the busy channel lockout (you can

choose: OFF, 1 carrier, 2 CTCSS/DCS);

14. press

;

15. by turning the Encoder knob, you can enable/disable the priority channel

scanning;

16. press

;

17. turn the Encoder knob and select the power level in tx H (high) or L (low);

18. press

;

19. turn the Encoder knob and select the transmission mode: WIDE or

NARROW;

20. push

;

21. rotate the Encoder knob and select the ﬁrst letter for the name of the

programmed channel. To switch to the next channel, push the

button

and turn the Encoder knob;

22. press

;

23. switch off the unit to ﬁnish the programming procedure and return to the

standard modality.

1 2 ... 13 14 15 16 17 18 19 20 21 22

Comentarios a estos manuales

Sin comentarios

Midland CT410 Guía para resolver problemas Pagina 18

Comentarios a estos manuales

Relacionado con productos y manuales para Receptor Midland CT410